Solutions Products Support About Us Find a Distributor Contact Us
Solutions Products Support About Us
Solutions Products Support
Master STAGES CLEAN 2115AL
Description Application Guidelines Properties Concentrations Mixing Ordering Information Additional Information
Health and Safety Data Sheet
Brochures
Case Studies
Technical Bulletins
Technical Articles
Tech Tips
Press Releases
Documents
Videos
logo - Master STAGES wrapped with Cleaning & RP Fluids and Master Fluid Solutions, teal
logo - Master STAGES wrapped with Cleaning & RP Fluids and Master Fluid Solutions, teal
Master STAGES™ CLEAN 2115AL

Low-foam Spray Washing Compound

Master STAGES™ CLEAN 2115AL - 5 gallon pail

Application Guidelines

  • In very high-pressure spray washers (over 1,000 PSI, 6894.76 kPa), de-burrers or water jet cutters, typical concentrations are 3% to 5%, and operating temperatures are ambient up to 140°F (60°C).
  • Foam may increase if the temperature is below 80°F (27°C) at the point of agitation.
  • For best corrosion resistance on ferrous parts, concentration should be kept between 5% and 10%.
  • CLEAN 2115AL has excellent aluminum compatibility. However, it is wise to pre-check tolerance for high temperatures (over 120°F, 50°C) or long exposure times (over 5 minutes) when washing 2000, 5000, or 7000 series wrought, or 300 series cast alloy.
  • For additional product application information, including performance optimization, please contact your Master Fluid Solutions' Authorized Distributor at https://www.masterfluids.com/ap/en-ap/distributors/index.php, your District Sales Manager, or email us at [email protected].

Master STAGES™ CLEAN 2115AL   
©2005-2024 Master Fluid Solutions™