Login
Home

Coolant - Water Miscible Fluids

Number of products in category is 8

WEDOLiT CW 6336

Water-miscible, conventional coolant

SDS
Documents
Read More...

WEDOLiT CW 6336 is suitable for grinding as well as for light to heavy cutting operations of steel, cast iron, aluminium (e.g. sensitive aluminium alloys of the 2000 and 7000 series) and non-ferrous metals*.

WEDOLiT CW 6336 is approved by CETIM according to specification EADS ASN 42302 annex 2, DASSAULT DQGT 0.4.2.0065 index D and by Bombardier BAMS 569-001 rev. B, for aerospace industry.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Good soft water stability (at approximately 5°dH)
  • Almost free of foam
  • Offers a very good skin compatibility


WEDOLiT CW 6506

Water-miscible, conventional coolant

SDS
Documents
Read More...

WEDOLIiT CW 6506 is suitable for light to heavy cutting operations of steel, stainless steel, aluminium (e.g. sensitive aluminium alloys of the 2000 and 7000 series), titanium and non-ferrous metals*.

WEDOLiT CW 6506 is approved by CETIM according to specification EADS ASN 42302 annex 2, DASSAULT DQGT 0.4.2.0065 index D and by Bombardier BAMS 569-001 rev. B, for aerospace industry.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a very good skin compatibility


WEDOLiT CW 8006

Water-miscible, semi synthetic coolant

SDS
Documents
Read More...

WEDOLiT CW 8006 is suitable for light to heavy cutting operations of steel, stainless steel, cast iron and aluminium.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a good skin compatibility


WEDOLiT CW 8906

Water-miscible, ester-based coolant

SDS
Documents
Read More...

WEDOLiT CW 8906 is suitable for grinding as well as for light to heavy cutting operations of steel, stainless steel, aluminium and titanium.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a very good skin compatibility


WEDOLiT CW 9006-CM

Water-miscible, semi synthetic coolant

SDS
Documents
Read More...

WEDOLiT CW 9006-CM is suitable for grinding as well as for light to medium cutting operations of steel, stainless steel and cast iron.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Good soft water stability (at approximately 10°dH)
  • Almost free of foam
  • Offers a good skin compatibility


WEDOLiT CW 9206

Water-miscible, semi synthetic coolant

SDS
Documents
Read More...

WEDOLiT is suitable for grinding as well as for light to heavy cutting operations of steel, cast iron and aluminium.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Good soft water stability (at approximately 10°dH)
  • Almost free of foam
  • Offers a very good skin compatibility


WEDOLiT K 81

Water-miscible coolant

SDS
Documents
Read More...

WEDOLiT K 81 is a water-miscible coolant, based on mineral oil. With water WEDOLIT K 81 forms stable emulsions in every mixture proportions. Emulsifying agents, inhibitors and high-pressure additives are combined, to allow a multipurpose application like metal working operations as well as corrosion protection.

WEDOLiT K 81 is used as emulsion for chipless and cutting metal-working-operations. For corrosion protection we recommend the application by flooding with emulsion or the application of the concentrate.

A very good corrosion protection is given by application as a hot emulsion (approx. 80°C) with a concentration of approx. 20% on zinc-phosphate coated surfaces with a layer of approx. 10-12 g/m². The corrosion protection test (salt-spraying-test) according to ASTM-B 117 or DIN 50021 gives no corrosion after a test-time of 48 hours.

WEDOLiT K 81 is easily removable with industrial cleaners. After annealing under protective atmosphere no residues will be found.



    WEDOLiT K 975-4

    Watermiscible coolant

    SDS
    Documents
    Read More...

    WEDOLiT K 975-4 is a semi synthetic watermiscible coolant. Developed with highest technical standards for a wide range of cutting operations.

    WEDOLiT K 975-4 is a high-performance coolant, useable for easy to heavy cutting operations of aluminium, steel alloys and yellow-metal. Discoloration of yellow metals must be pre-tested although.

    • Boric-acid and Amine-free
    • Formaldehyde-releaser-free
    • good foam behavior
    • Good anti corrosion effect