>> Afficher les nouveaux produits - TRIM
Master Fluid Solutions announces its acquisition of Wilhelm Dietz GmbH (WEDOLiT) based in Düsseldorf, Germany
Master Fluid Solutions, a global leader in metalworking fluids and associated chemical manufacturing based in Perrysburg, Ohio, USA, announces that it has acquired Wilhelm Dietz GmbH (WEDOLiT) based in Düsseldorf, Germany. Wilhelm Dietz GmbH primarily serves the needs of the pipe and tube expansion, wire drawing and metalworking industries under its WEDOLiT brand name.
During October 2019, Master Fluid Solutions acquired ‘Wilhelm Dietz GmbH & Co. KG’ based in Dusseldorf, Germany. The company was founded over 80 years ago and manufactured pre-lubes, cooling lubricants, cold forming products, corrosion protection products and pipe and tube expander oils, under the brand of WEDOLiT.
In November, the Dusseldorf location became the new European Headquarters and work began to align the existing company and employees with Master Fluid Solutions’ global structure and operations.
At the end of 2019/ start of 2020, the Wilhelm Dietz business was dissolved and the new company of ‘Master Fluid Solutions WDG GmbH’ was officially formed.
The acquisition has provided Master Fluid Solutions with manufacturing facilities within Europe, which has always been a company goal.
In the long-term our customers will experience many benefits including:
Dewatering fluids remove water from a part and provide a short, few day, rust inhibitor. Rust inhibitors usually last months to years. Rust inhibitors without a dewatering effect can trap water against the part creating a potential corrosion issue. By removing the water first, you eliminate this issue. Dewatering fluids also split the water quickly once it has removed it. Rust inhibitors may be miscible in water therefore becoming less effective.
After machining, parts are often temporarily stored before processing them. In order to avoid water that remains on the surfaces (risk of corrosion), a dewatering operation is necessary. The better the dewatering effect, the lower the corrosion protection. Most competitor pure dewatering fluids do not offer any corrosion protection. Therefore a 2-tank-system is necessary (1st dewatering, 2nd corrosion protection). Since WEDOLiT dewatering products offer short-term corrosion protection, two-tank systems can be replaced by a single-tank system. WEDOLiT dewatering fluids also remove the water faster than the competition and split it from the solvent completely thereby increasing the useful bath life.
There are two cases where a VCI foil fails to protect the parts:
There is a simple conversion between the two, 1 cycle is equivalent to a minimum 3 days indoor storage.
DIN EN ISO 6270-2 AHT (humidity chamber test)
DIN EN ISO 9227 NSS (salt spray test)
Dewatering effect and phase separation are WEDOLiT internal tests.
WEDOLiT brand corrosion inhibitors have a 2-year shelf life. As with any Master Fluid Solutions products, any product beyond the shelf life can be tested in one of our labs to determine if it still meets our rigid standards for quality.
No. Most metals used in the food processing industry are corrosion resistant and the need for corrosion inhibitors is rare.